_default.jpg

Windows and doors producer

Ponzio

PT 50

System description

Aluminium system profiles without the thermal insulation, mainly dedicated to the interior of buildings: boxes, partition walls, display cases, sliding doors (manually or automatically operated), double acting and smoke hermetic doors.

The PT 50 system allows to use the variety of fillings: glass, aluminium panels, „sandwich” fillings, panel boards and PVC of width 1 – 40 mm. The structural depth for frame and sash is 52 – 60 mm.

The regular doors or the coplanar doors can be assembled in the PT 50 system. The advantage of axial clamped hinges is an ease of assembly in three planes.

Characteristics of system
- precise relation to other Ponzio systems (mutual corners, beadings, toolset and majority hardware)
- the possibility of facing window sashes (one plane outside) and doors (two planes outside and inside)
- bending profiles
- the variety of door leaves: with wide beam or profiles cut at an angle of 45, with or without threshold
- possibility of assembling smoke hermetic doors

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17 615 T1

Gaskets
EPDM synthetic rubber according to DIN7863 and standard according to ISO 3302-1, E2

Hardware
renowned companies only:Fapim, Savio, Iseo, Cisa, Hautau, Geze, KFV etc.

Fillings
single or packet window panels with any kind of glass or opaque panels

Surface finishing
powder coating with polyester on chromate undercoater according to Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown – according to Qualanod standards, lacquered for colour imitated wood

Acoustic insulation
for glass 44.1/16/6
- moduls indicator RA2 OK238 dB
- moduls indicator RA1 OK134 dB
- moduls indicator Rw  Rw39 dB

Smoke control
Sm and Sa class according to PN-EN 13501-2:2005
Permissions and quality certificates
Technical approval of Building Engineering Institute AT-15-5214/2012 “System of internal smoke control doors, general applications doors and segments of partition walls of PONZIO PT 50”

PE 60

System description

The three-chamber system for profiles with Euro standard hardware groove and cabinet used in windows and balcony doors made of PVC or wood profiles.

The structural depth of the profiles for frame is 60 mm, for sashes 68 mm. Wider-24 mm, in comparison with PE 52 system, thermal insulator and two components central gasket guarantee high thermal parameters, being economic at the same time.

Thanks to the modernization of the sealing elements, there is no need for a drip, what positively influences the beauty of the curtain wall.
The system allows to use the wide range of hardware and eases their installation. Three-chamber Ponzio

PE 60 system provides large stiffness of the profiles, which allows accomplishing construction of large dimensions.

Characteristics of system
- the possibility of facing windows sashes (one plane outside)
- the possibility of assembling hi-tech two components EPDM gaskets
- bending profiles
- many ways of making corner connections

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1

Gaskets
EPDM synthetic rubber according to DIN7863 and standard according to ISO 3302-01, E2

Hardware
renowned companies only: Sobinco, Savio, Winkhaus etc.

Fillings
single or packet window panels with any kind of glass or opaque panels of width: 10-51 mm

Surface finishing
powder coating with polyester according to the Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown - according to Qualanoad standards, lacquered for colour imitated wood

Thermal insulation
frame heat transfer coefficient Uf = 2,0 - 2,2 W/m2K
permissions and quality certificates
Initial type tests according PN-EN 14351-1
Certificate of conformity: 2nd RC class of antiburglary according to PN-EN 1627:2011

PE 68

System description

The three-chamber system for the windows with "euro" standard hardware groove and groove used in windows and balcony doors made of PVC or wood profiles. The depth of the frame is 68 mm and the depth of leaf is 76 mm. Due to wider, in comparison to the PE 60, 32 mm thermal insulator and one or two component central gasket, we can achieve high high thermal parameters.

There is no need for a drip, what positively influences the beauty of the curtain wall, thanks to the modernization of the sealing elements.

The system allows to use the wide range of hardware and ease their installation. Three-chamber system Ponzio PE 68 permits to set up constructions of large dimensions.
Glass thickness of 18-59 mm can be applied into the system as well as the arched constructions.

Characteristics of system
- close connection to other Ponzio systems
- the possibility of facing windows sashes (one plane outside)
- the possibility of using hi-tech two components EPDM gaskets with perfect thermal insulation. An aesthetic appearance and an ease of assembly
- bending profiles
- many ways of making corner connections

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1

Gaskets
EPDM synthetic rubber according to DIN7863 and standard according to ISO 3302-1, E2

Hardware
renowned companies only: Sobinco, Savio, Winkhaus, etc.

Fillings
single or packet window panels with any kind of glass or opaque panels

Surface finishing
powder coating with polyester on chromate undercoater according to Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown - according to Qualanoad standards, lacquered for colour imitated wood

Thermal insulation
heat transfer coefficient (for frame) Uf=1,5 W/m2K (basic option)
Permissions and quality certificates
Initial type tests according to PN-EN 14351-1
Certificate of conformity: 2nd RC class of antiburglary according to PN-EN 1627:2011, class R3 according to PN-EN 1627:2012

PE 78

System description

Three-chamber system with “euro” standard groove and groove used in windows and balcony doors made of PVC or wooden profiles.

It is dedicated for constructions with very high thermal requirements.
The structural depth of profiles for frames is 78mm, for sashes 86mm.
Thanks to multi chamber thermal breaks (42 mm) and two component central gasket we can obtain high thermal insulation. In PE 78N Uf frame heat transfer coefficient equals 1,7 W/m2K. In more insulated version PE78N+, with closed glass chamber, the Uf value equals 1,3 W/m2K.
The system allows to use wide range of hardware and ease the mounting.

Three-chamber profile construction of PE 78N system, provides large stiffness of profile, which allows accomplishing constructions of large dimensions.

Characteristics of system
- precise relation to other Ponzio systems
- the possibility of facing window sashes (one plane out side)
- the possibility od assembling hi-tech two component EPDM gaskets
- the possibility of bending profiles
- many ways of accomplishing corner connections

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1

Gaskets
EPDM synthetic rubber according to DIN7863 and standard according to ISO 3302-1, E2

Hardware
renowned companies only: Sobinco, Savio, Winkhaus, etc.

Fillings
single or packet window panels with any kind of glass or opaque panels of width: 23-61 mm

Surface finishing
powder coating with polyester on chromate undercoater according to Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown - according to Qualanoad standards, lacquered for colour imitated wood

Thermal insulation
frame heat transfer coefficient Uf=1,3 W/m2K
Permissions and quality certificates
Initial type tests according to PN-EN 14351-1
Certificate of conformity: 2nd RC class of antiburglary according to PN-EN 1627:2011, 3rd RC class according to PN-EN 1627:2012

PE 78 EI – Fire system

System description

The three-chamber system is designed to set up internal or external firewalls. PE 78EI allows to assembly single and double-wing, outward opening or inward opening doors with different threshold solutions. The system uses thermal pads which ensure resistance to fire : EI15, EI30, EI45, EI60, EI90, EI120. The structural depth of the frame and sashes is 78 mm (89 mm for EI120).

In the system there is used thermal break - 35 mm wide, which ensures high thermal insulation.
There is an easy assembly of accessories in the PE 78EI system, which greatly accelerates the formation of the structure. With the three chamber design and additional reinforcing elements, the system allows to assembly construction of large size.

Characteristics of system
- precise relation to other Ponzio systems
- facing of door leaves on the outer side
- many variants of realization door leaves
- the possibility of realization smoke control door
- the possibility of realization arch constructions
- two types of fire resistant fillings: gypsum, alumino-silicate
- fillings: 8-54 mm, (58-65 mm for EI120)

Aluminium profiles
EN AW-6060 according to PN-EN 573-3: T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1

Gaskets
EPDM synthetic rubber according to PN-EN 12365-1:2006

Hardware
renowned companies only: Fapim, Savio, Iseo, Cisa, ECO Schulte, KFV, Geze, Nemef, Nova Feb, Assa Abloy, BKS, Dorma, Wilka etc.

Fillings
single glasses with fire resistance properties or packet window panels according PN-EN 1279-1:2006, PN-EN 1279-5:2006. As an opaque panels there should be used layered elements specified in the technical approval

Surface finishing
powder coating with polyester on chromate undercoater according to the Qualicoat standards, any RAL colour at choice: anodized in colours: natural aluminium, olive, champagne, gold, brown – according to the Qualanod standards, lacquered for colour imitating wood

Smoke control
Sa and Sm class according to PN-EN 13501-2:2005

Acoustic insulation
for single glass 17 mm Swissflam, with fire resistance features, modulus indicator RA1 - 35 dB RA2 - 30 dB RW - 37 dB

Permissions and quality certificates
Technical approval of Building Engineering Institute AT-15-7540/2013 "Fire resistance and kit to made fire resistant internal and external walls of PE 78 EI system from aluminium profiles with thermal barrier".
Classification of fire resistance: EI15, EI30, EI45, EI60, EI90, EI120

PF 152HI – Curtain wall system

System description

The transom post construction system assigned for accomplishment of curtain walls, rooves and skylights with the higher thermal insulation.

The width of posts and transoms equals 52 mm, for beads 51 mm. The technical solutions allows to construct straight and curve walls, interior and exterior angles and winder gardens. The system can be assembled with the support construction made of steel or wood.

Having used specially designed thermal break, there is a possibility to build walls with frame heat-transfer coefficient Ucw = 1,15 W/m2K (for 28 mm single glazed unit).

Characteristics of system
- solution for lintel window sill belt classified for EI60
- possibility of assembling various decorative external elements
- possibility of accomplishing of either horizontal or vertical lines
- possibility of bending profiles

Aluminium profiles
EN AW-6060 according to PN - EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1

Gaskets
EPDM synthetic rubber according to DIN 7863 and standard according to ISO 3302-01, E2 Hardware
renowned companies only: Fapim, Geze, Security Style, Roto, Dorma, Esco, etc. Fillings
single or packet window panels with any kind of glass or opaque panels of width: 23 - 42 mm

Surface finishing
powder coating with polyester according to the Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown - according to Qualanod standards, lacquered for colour imitating wood

Thermal insulation
frame heat transfer coefficient Uf (Uo) = 1,13 W/m2K with 24 mm thermal insulator
Permissions and quality certificates
Initial type tests according to PN-EN 13830:2005

PF 152WG – Winter garden system

System description

The system for winter gardens or other spacial constructions. The construction of roof slope can be accomplished with facade profiles from PF152 system or on the base of PF152WG rafters.

The whole construction can be based on curtain wall posts, posts from windows and doors systems, as well as on the reinforced posts from PF152WG system. The rafter construction allows to use standard glazing beads from windows and doors systems. The connection between rafters and transoms is the same as in the PF152 curtain wall system. The elements of the roof are fixed by hinge connection on the wall beam and by means of system joints on the eaves beam with system pipe for eaves. There is a possibility of using sliding systems from Ponzio offer.

Characteristics of system
- allows to connect the profiles from PF152 WG system, windows and doors system, as well as Ponzio sliding systems
- allows to accomplish very complex constructions (used in the elements of eaves beam and wall beam, “articulated” system allows to turn the plane of the roof in the range between 7- 45 degrees of the inclination to the vertical plane)
- easy assembly and prefabrication

Aluminium profiles
EN AW-6060 according to PN-EN 573-3 T66 according to PN-EN 515 Al Mg Si 0,5 F22 according to DIN 1725 T1, DIN 17615 T1

Gaskets
EPDM synthetic rubber according to DIN 7863 and standard according to ISO 3302-1, E2

Fillings
packet window panels, opaque panels polycarbonate 8-40 mm thick

Surface finishing
powder coating with polyester on chromate undercoater according to Qualicoat standards, any RAL colour at choice; anodized in colours: natural aluminium, olive, champagne, gold, brown - according to Qualanoad standards, lacquered for colour imitating wood